Metallic epoxy flooring in College Station TX - a deep, glossy floor on a smooth slab
Tired of a dull gray slab or peeling garage paint? We strip it, smooth it and put down a metallic floor with real depth.
- Licensed and insured.
- Free estimates at your property.
- We reply within 1 business day.
What goes into a metallic epoxy floor in College Station?
Metallic epoxy flooring turns a bare concrete slab in a College Station garage, shop or home into a glossy floor with the swirls and depth of poured stone. It's built from a primer, a metallic base coat worked by hand while it's wet, and a clear topcoat over it, and most of the job is getting the slab smooth and clean enough to show off instead of showing flaws.
Most people call us because the slab they have looks tired or stained, or it's half-covered in a coating that's peeling, and they want a floor that looks finished. The price and the schedule both turn mostly on that slab: its size, how much old paint or sealer has to come off, how many cracks and joints need filling, and which topcoat suits the light in the room. An older or patched slab takes longer and costs more than a clean new one, and now and then we meet concrete with a mind of its own. I'll look at all of it in person and send you a written estimate that lists the prep along with the finish, so you can see where the money goes.
How we put down a metallic epoxy floor
A metallic finish shows every flaw under it, because there are no chips to hide a patch or a ridge, so most of our time goes into the slab. Our crew diamond grinds the concrete to open and smooth it, gets every bit of old paint or sealer off, and fills cracks and joints until the surface is even. Then we roll on the primer, lay the metallic base coat and work the pigment while it's wet to set the movement, and finish with a clear topcoat. In a sunny space I'll talk with you about a topcoat that holds its color, because that choice decides how the floor looks a few summers from now.
Metallic epoxy isn't the right floor for every room, and I'd rather say so up front. If the space sees hot water, harsh cleaners or heavy daily abuse, urethane cement flooring holds up better there. If you like the look of bare concrete and don't want a coating at all, polished concrete flooring gets its shine from the slab itself.
Bold swirls and deep color
This suits a garage, game room or showroom where you want the floor to be the first thing people notice. A busier pattern also hides dust and tire scuffs better than a calm one.
A soft, even sheen
Living rooms, offices and studios often look best with a quieter pattern that sits back and lets the room lead. A calm finish shows dust and footprints sooner, so it suits rooms that get swept often.
A grip additive in the topcoat
Shops and spaces that get wet or oily do better with a fine grit mixed into the topcoat so the floor isn't slick. You trade a little shine for footing, and in a working space I'd take the footing.
What a metallic epoxy floor in College Station needs before we start
College Station requires a building permit to remodel a single-family home or duplex, and a contractor has to register with the city before getting one. I don't guess at whether a new floor coating counts as that kind of work, so before anything is scheduled we check with the city's building division, take care of the permit when it falls to us and tell you what we found out. If you'd like to ask them yourself, they answer permit questions at cspds@cstx.gov or 979.764.3570.
On jobs around here we run into a lot of older slabs carrying paint or sealer from a past owner, and garages that have been patched more than once. Both show through a metallic finish, so we plan the stripping and patching at the estimate instead of finding out halfway through, and we see the same kind of slabs in Bryan and Navasota.
Why College Station homeowners call Mainstay College Station Epoxy Flooring for metallic floors
I come out for every estimate
I do the estimates and first visits myself, so the person reading your slab is the one who answers for the floor. I'd rather talk you out of a metallic floor than put one on a slab I don't think can carry it.
A lead installer stays on site
Our crew handles the grinding, prep and coating with a lead installer on the job, so the person working the pigment knows the plan we agreed on. Metallic is worked by hand while it's wet, and that's not a step to leave to whoever happens to be free.
Topcoats picked for sunny garages
Plenty of garages here sit with the door up through the afternoon, and Texas sun yellows plain epoxy, so we settle the topcoat with you at the estimate. It's the cheapest point in the job to get right and the most expensive to fix later.
Six years of prep-first floors
I learned coating work on an experienced installer's crew and started this business in 2020, after years of pressure washing garages and patios. We're licensed and insured, and our work is backed by our satisfaction guarantee.
On a metallic floor, what matters most is the concrete you can't see once it's done. Tell us about yours on our contact page or call (979) 393-7012, and I'll come take a look.
Request a quoteGet a written metallic epoxy estimate that lists the prep
We reply within one business day by phone or email, and the estimate is free and comes with no obligation. I'll come out to see the floor, ask how you use the space and send you a written estimate that lists the prep along with the finish.
What happens after you call about a metallic epoxy floor?
Call or send the form
I answer the call myself or get back to you by phone or email. We pick a time for me to come see the floor.
I look at the slab
I check the concrete for moisture, cracks and old coatings and ask how you use the space, because a parked car, a home gym and a showroom each need something different. You get a written estimate that lists the prep along with the finish, so the cost of getting the slab ready isn't buried in one number.
Our crew preps and coats
Once you say go, our crew does the prep and the finish with a lead installer running the job. Plan to keep people and pets off the floor while it cures, and the car off it a good while longer.
We walk the finished floor
I come back and walk the floor with you, so anything you're not happy with gets pointed out while we're both standing on it. We'll also go over how to sweep and mop it so the finish keeps its shine.
Frequently asked questions
How much does metallic epoxy flooring cost in College Station?
Professionally installed metallic epoxy usually costs about $8 to $15 per square foot across the US, and that range covers grinding, moisture testing, primer, base coat and topcoat. It's a national figure, not our price, and where your floor lands depends on its size, how much old coating has to come off and which topcoat it needs. Your written estimate gives you the number for your own floor.
What causes metallic epoxy to turn yellow in a sunny garage?
Sunlight does it, when the topcoat has no UV protection to block it. One Texas guide says standard epoxy without that protection yellows noticeably within one to two summers in sunny spaces, like garages with the doors open or sunrooms, while a metallic floor under an aliphatic polyurethane or polyaspartic topcoat, both clear coats made to resist yellowing, holds its color. In a garage that gets sun, that's the kind of topcoat we'll talk through with you.
How long does a metallic epoxy floor last in Texas?
One Texas guide estimates a properly installed home metallic epoxy floor lasts 10 to 20 years before it needs recoating, with normal foot traffic and routine cleaning. That long life leans as much on daily care as on the install, so sweeping grit off and wiping spills up keeps you toward the long end.
How soon can I walk or drive on a new metallic epoxy garage floor?
In one guide's garage timeline, the floor is walkable 4 to 6 hours after a polyaspartic topcoat goes on and drivable in 24 to 48 hours. Other topcoats can take longer, so I'll tell you the wait for the one we pick before we set a date.
Should I ask for a moisture test before a metallic epoxy floor goes in?
Yes, it's a fair question to ask any contractor. One maker's guide says concrete slabs should be tested for elevated moisture vapor emission, which is water vapor rising up through the slab, before the coating goes on, and owners can ask whether a quote includes that test. Moisture pushing up from below is one of the usual reasons a coating lets go, so it's worth knowing before the money's spent.
Can metallic epoxy go on a patio or outdoor slab?
It's not a good fit outdoors. One maker's bulletin says epoxies and urethane aren't recommended on outdoor concrete because of moisture in the slab, sunlight, weathering and freeze-thaw. For a pool deck or patio, we'd point you to pool deck coatings and resurfacing instead.
Other floors worth a look
Urethane Cement Flooring
For a commercial kitchen, brewery or shop floor that sees hot washdowns and harsh cleaners, urethane cement handles heat and moisture that would wear a decorative epoxy floor down faster.
Polished Concrete Flooring
If you'd rather keep the concrete itself as the finish, polishing grinds and densifies the slab to a sheen with no coating on top to peel, chip or yellow later.
College Station, TX
Get your metallic floor estimate started
Call (979) 393-7012 or send the form with your floor's size, how much sun it gets and any old paint or sealer on it, so my first visit starts with the right questions.